AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox AC Repair in Fort Worth: What to Know First
Lennox AC repair in Fort Worth typically runs $150 – $650 depending on the part that failed, and most jobs are completed the same day we diagnose them. We’re an independent Lennox service provider, not a factory-authorized dealer, which means we answer to you, not a corporate warranty department. Every repair gets a written price before we start and a written guarantee that covers the full year.
This page is for Fort Worth homeowners whose Lennox system stopped cooling, is short-cycling, or is making a noise it didn’t make last summer. If that’s you, call (817) 730-5369 and you’ll talk to a live person, day or night. We’ll get a technician to your house inside the window we give you.
How Lennox Products Fail – and How We Fix Them
Every brand has patterns. After two decades working on Lennox equipment across the Southwest, Marco Benitez and our crew have seen the same failures repeat often enough to diagnose them fast. Here’s what we find most often on Lennox systems in Fort Worth:
- XC and XP series condenser fan motors seizing up. The XC21 and XP20 lines run a variable-speed condenser fan that works hard in Fort Worth heat. When the bearings go, you hear a grinding from the outdoor unit and the head pressure climbs. We replace the motor with an OEM Lennox part or a quality equivalent, depending on what’s available faster and what your warranty allows.
- Merit and Elite series capacitor failures during heat waves. The cheaper Merit line and the mid-range Elite series both use dual-run capacitors. Fort Worth’s 100-degree stretches cook these caps hard. Symptom: the outdoor unit hums but the fan won’t spin, or the compressor won’t kick on. We keep common Lennox capacitor ratings on the truck, so this is usually a same-day fix for under $250.
- Refrigerant leaks at the evaporator coil on Elite and Signature units. Lennox’s aluminum evaporator coils are better than the old copper ones, but the braze joints where the lineset meets the coil are still a leak point. If your system is low on charge every spring, that’s the first place we look. We pressure-test with nitrogen, find the exact leak, repair it, and recharge with the correct refrigerant for your model.
- Thermostat communication faults on Signature series (iComfort). The iComfort thermostats paired with Signature systems occasionally lose communication with the air handler or outdoor unit. The screen shows a fault code, the system won’t run, and the problem is often a communication wire or a firmware issue, not the compressor. We diagnose the actual fault instead of guessing and selling you a compressor you don’t need.
- Drain pan and float switch issues on horizontal evaporator coil installs. A lot of Fort Worth homes have horizontal furnaces in the attic with the Lennox coil on its side. Condensate pools in the pan, the float switch trips, and the AC shuts off with a “no cooling” symptom that’s actually a drainage problem. We clear the line, check the pan, and reset the switch. It’s a $150 – $250 fix that some companies misdiagnose as a failed control board.
Marco’s rule is simple: “Tell me what it is doing, and I will tell you what it needs.” The symptom tells us most of what we need to know before we even open the panel.
Styles & brands we work with







Our Lennox AC Repair Process
Here’s exactly what happens when you call us for Lennox AC repair in Fort Worth:
- 1
You call (817) 730-5369. A live person answers, takes down the model number if you have it, and schedules a window that we actually hold.
- 2
Your technician arrives on time. Uniformed, background-checked, and carrying the common Lennox parts for your series. We call ahead when we’re en route.
- 3
We diagnose and show you the problem. We test the capacitor, check refrigerant pressures, read fault codes, and inspect the coil. Then we show you what failed and explain it in plain English, not a sales script.
- 4
You get a written price before any work starts. That’s the Garrison Standard. The price on the sheet is the price you pay, including parts and labor. No surprise add-ons at the end.
- 5
We do the repair, test the system, and clean up. We verify temperatures at the vents, check the charge, and confirm the system cycles properly. We leave the site the way we found it.
- 6
You get the 365-Day Done Right Promise in writing. If the repair fails within a year, we come back at no charge. That’s not an upgrade. It’s included on every job.
See the difference
Before
After
Before
After
Before
AfterWhat Lennox AC Repair Costs in Fort Worth
Most Lennox repairs in Fort Worth fall between $150 and $650. Here’s the breakdown for the jobs we do most often:
- Capacitor replacement: $150 – $275
- Condensate drain clearing or float switch fix: $150 – $250
- Refrigerant recharge (with leak check): $250 – $550
- Condenser fan motor replacement: $300 – $550
- Compressor contactor or relay repair: $200 – $400
- Thermostat replacement or communication fix: $200 – $450
What moves the price is the part itself and whether your system uses R-410A or the newer R-454B refrigerant, which costs more per pound. Age matters too. A compressor replacement on a 14-year-old Merit unit usually isn’t the right call; that’s when we’ll show you repair-versus-replace numbers side by side and let you decide. Call (817) 730-5369 for an exact quote on your Lennox system. Estimates are free.
Why Fort Worth Homeowners Call Dalton Heating & Air Fort Worth for Lennox Work
Garrison Partners has operated under The Garrison Standard since 2003. That means every job, on every call, follows the same five rules: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year.
We carry factory training across all nine major residential brands, so when a Lennox system shares a footprint with a Carrier or Trane unit in a two-system Fort Worth home, one visit covers both. You don’t have to call three companies. You get one crew that actually knows Lennox wiring, charge specs, and fault codes instead of a tech who’s figuring it out on your dime. And if the repair doesn’t hold, we come back free within the 365-day window. That’s the only guarantee we’ve ever offered, because it’s the only one we’ve ever needed.
Frequently Asked Questions About Lennox AC Repair
No. Using an independent service provider for AC repair doesn’t void the Lennox warranty as long as the repair is done properly and with acceptable parts. We use OEM Lennox parts or quality equivalents that meet warranty requirements.
Same-day or next-day in most cases. We answer the phone 24/7 with a live person, not a voicemail queue, and we schedule a specific window that we hold. Call (817) 730-5369 and we’ll get you on the schedule.
The rule we use: if the repair costs more than 30% of the replacement value and the unit is over 10 years old, replacement starts to make financial sense. We’ll show you both numbers in writing and let you decide. We don’t get paid to push you either direction.
Yes. We keep common Lennox capacitors, contactors, fan motors, and control board fault-code references on the truck for the Merit, Elite, and Signature series. That’s why most of our Lennox repairs in Fort Worth are completed the same day we diagnose.
We come back at no charge. Every repair includes the 365-Day Done Right Promise, in writing. If the same problem returns within a year, the return visit and the work to correct it are free.
Ready to get your Lennox cooling again? Call (817) 730-5369 for a free estimate and a repair time you can plan around.
Written by Marco Benitez, Owner, Dalton Heating & Air Fort Worth at Dalton Heating & Air Fort Worth, serving Fort Worth and nearby areas.