Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Fort Worth Homeowners
Fort Worth Furnace Repair typically costs between $150 and $700 depending on the failed part, and most jobs are completed the same day. A furnace that won’t ignite, short-cycles, or blows cold air during a January cold snap isn’t something to wait out. Dalton Heating & Air Fort Worth has been repairing furnaces under The Garrison Standard since 2003, with written pricing before any work starts and a full-year written guarantee on every repair. Our technicians arrive in uniform, inside the stated window, and carry parts for most major brands on the truck. If your furnace is acting up, call (817) 730-5369 and a live person answers, day or night.
What you’ll get on every call: a background-checked technician who diagnoses the problem, shows you the price in writing, and doesn’t start until you approve it. That’s the Garrison Code, and it’s been the same since our home base opened in 2003. Marco Benitez, who leads our Fort Worth team, holds every tech to it.
Furnace Maintenance
Furnace Maintenance is the scheduled service that keeps your heating system running clean and catching small problems before they become $700 repairs. In Fort Worth, we recommend it once a year, ideally in October before the first real cold snap. Dalton Heating & Air Fort Worth performs a full maintenance visit for $80 – $200, which includes a written report of what we found and what we did. You’ll know the condition of your heat exchanger, burners, blower motor, and gas pressure when we leave.
What the Maintenance Visit Covers
We inspect the heat exchanger for cracks, test gas pressure at the manifold, check the flame sensor for carbon buildup, and measure the blower motor’s amp draw. We also test the thermostat calibration and cycle the system to confirm it reaches set temperature. Any issues get flagged in writing with a repair price before we touch them.
Why Annual Service Matters in Fort Worth
North Texas winters swing hard. A furnace that sat idle since March can fire up on the first 30-degree night and fail immediately. Annual maintenance catches the failures in October, when the repair is convenient and the part is in stock, not at 11 PM during a freeze.
Styles & brands we work with
Heat Pump Repair
Heat Pump Repair addresses a system that both heats and cools by moving heat between indoors and outdoors, and in Fort Worth these units run year-round which doubles the wear on components. When a heat pump won’t switch to heating mode or runs constantly without reaching temperature, the problem is usually the reversing valve, a failed defrost control, or low refrigerant. Dalton Heating & Air Fort Worth services heat pumps for $150 – $650 per repair depending on the component, with the same written price and one-year guarantee as every furnace repair we do.
Common Heat Pump Failures We See
In Fort Worth neighborhoods like White Settlement and River Oaks, we regularly replace failed defrost boards and reversing valves on units that are only 7 to 10 years old. The Texas humidity accelerates corrosion on outdoor control boards. A heat pump stuck in cooling mode during a December night is a common symptom of a reversing valve that has stopped shifting.
Heat Pump Diagnosis Without Guesswork
We use a digital manifold gauge set to read superheat and subcooling, not a guess-and-check approach. That tells us whether the issue is refrigerant level, airflow, or a failed component before we quote a single dollar. You get the diagnosis in writing with the repair price.
Heating Repair
Heating Repair covers any system that is supposed to warm your home but isn’t doing the job, whether it’s a gas furnace, electric furnace, heat pump, or hydronic setup. Most heating repairs in Fort Worth run $150 – $700 depending on what failed, and the majority are resolved in a single visit. Dalton Heating & Air Fort Worth sends a factory-trained technician who carries common parts for Furnace Repair in Fort Worth units, so we’re not leaving to hunt down a capacitor while your house gets colder.
What We Fix Most Often
Ignitors, flame sensors, blower motors, gas valves, and control boards account for most heating repairs we do across Fort Worth and nearby cities like Saginaw, Haltom City, and Lake Worth. Each one has a distinct failure pattern, and our techs are trained to distinguish a bad ignitor from a gas pressure problem in the first ten minutes of diagnosis.
Heating System Age and Repair Decisions
When a furnace passes 15 years old and a major component fails, we’ll tell you straight whether the repair is worth doing. A $600 blower motor on a 20-year-old furnace may not make sense, and we’ll show you the numbers both ways. No pressure, just the facts with prices in writing.
Boiler Repair
Boiler Repair addresses hydronic heating systems that circulate hot water through radiators or baseboard units, which are less common in Fort Worth but still found in older homes in areas like Forest Hill and Richland Hills. Boiler repairs typically run $150 – $700 depending on whether the issue is a circulator pump, expansion tank, pressure relief valve, or zone control. Dalton Heating & Air Fort Worth services residential boilers with the same written pricing and full-year guarantee we apply to every furnace repair.
Boiler Pressure and Leak Diagnosis
The two most common boiler calls we get in Fort Worth are systems losing pressure and systems making banging noises. Low pressure usually points to a failing expansion tank or a slow leak at a valve. Banging is almost always air trapped in the lines or a circulator pump that’s on its way out.
Boiler Safety Checks We Never Skip
Every boiler repair includes a check of the pressure relief valve and a carbon monoxide test at the flue. A boiler that’s overfiring or venting improperly is a genuine safety risk, and we don’t sign off on any boiler job until those numbers read correctly.
Gas Furnace Repair
Gas Furnace Repair is what most Fort Worth homeowners need when the heat won’t come on, and it usually involves the ignition system, gas valve, or a safety switch that’s doing its job. Repairs to a gas furnace in Fort Worth run $150 – $700, with ignitor replacements on the lower end and gas valve or blower motor replacements on the higher end. Dalton Heating & Air Fort Worth works on gas furnaces from Furnace Repair in Haltom City to Burleson, always with the price in writing before we start.
Ignition System Repairs
Hot surface ignitors crack and fail, it’s the most common gas furnace repair we do. When the ignitor fails, the furnace won’t light and the blower runs cold air through the house. We stock ignitors for Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so most ignitor replacements are done in under an hour.
Gas Valve and Safety Switch Failures
A gas valve that won’t open, or a limit switch that keeps tripping, points to a real problem that needs a trained hand. We test incoming gas pressure, check the manifold pressure after the valve, and verify the limit switch is not masking an overheating condition. Never attempt gas valve work yourself, and if you smell gas, leave the house and call CenterPoint Energy before anyone else.
Furnace Tune Up
Furnace Tune Up is the 21-point service that restores a furnace to proper operating condition before heating season, including cleaning the burners, testing the flame sensor, checking gas pressure, and measuring temperature rise across the heat exchanger. A tune up in Fort Worth costs $80 – $200 at Dalton Heating & Air, and it comes with a written report showing every reading we took. We recommend scheduling a Furnace Tune Up once a year, ideally September through November before the cold arrives.
What the Tune Up Includes
We clean and inspect the burners, test the flame sensor’s microamp reading, verify gas manifold pressure against the manufacturer’s spec, check the heat exchanger for visible cracks, and measure the temperature rise to confirm correct airflow. We also inspect the venting and test for carbon monoxide at the flue, because a furnace that runs but vents badly is a danger nobody should ignore.
Furnace Tune Up Versus Maintenance
A tune up is a deep clean and calibration; maintenance is the broader inspection and safety check. Many Fort Worth homeowners schedule both in one visit in late fall. We’ll tell you honestly if your furnace only needs the tune up, or if it’s due for a full maintenance inspection.
Emergency Furnace Repair
Emergency Furnace Repair is same-day or after-hours service when your furnace fails during a freeze, and in Fort Worth it’s available through Dalton Heating & Air 24 hours a day, 7 days a week with a live person answering the phone. Emergency repairs cost the same as regular repairs, $150 – $700 depending on the failed component, with no overtime surcharge. If your furnace dies at 10 PM on a 25-degree night, call (817) 730-5369 and a real person will dispatch a technician.
What Counts as a Furnace Emergency
No heat during freezing weather, a burning smell, or a carbon monoxide detector going off are all reasons to call immediately. A furnace that’s making loud banging or screeching noises should also be shut off and checked. If you smell gas, leave the house before you call anyone.
Overnight and Weekend Dispatch
Our Fort Worth team keeps trucks stocked through the winter for common emergency failures like ignitors, flame sensors, capacitors, and blower motors. Most emergency calls in neighborhoods like Sansom Park, River Oaks, and Colleyville are diagnosed and repaired within two hours.
Brands We Service
York furnaces are common in older Fort Worth neighborhoods, and we’ve repaired enough of them to stock their hot surface ignitors and flame sensors on the truck. York’s tubular heat exchangers have specific inspection points we check on every tune up, and we source OEM parts when a replacement is needed rather than generic substitutes.
Daikin and Bryant units show up often in newer construction across Fort Worth and the mid-cities. Daikin’s variable-speed boards and Bryant’s communicating thermostats require factory-specific diagnostic procedures, which our technicians are trained to run. Whether you have a Daikin, a Bryant, an American Standard, or any other make, we can get your heat back on and stand behind the work for a full year.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Furnace won’t ignite or stay lit. If the burners light and then shut off after a few seconds, the flame sensor is likely dirty or failing. It may seem minor, but a furnace that can’t prove its flame is lit will lock out entirely, and that typically happens on the coldest night you need it most.
- Short cycling, on and off every few minutes. A furnace that starts and stops rapidly is often overheating due to restricted airflow or a failing limit switch. Short cycling wastes gas, strains the blower motor, and shortens the life of the heat exchanger.
- Cold air blowing from the vents. If the blower runs but the air isn’t warm, the burners are not firing or the gas valve has failed. Running the blower without heat wastes electricity and masks a problem that will only get worse.
- Banging, popping, or screeching noises. Popping can mean delayed ignition in the burner chamber. Screeching is usually a blower motor bearing going out. Both are repairable now, and far more expensive if they’re ignored until the part fully fails.
- Carbon monoxide detector sounds or you smell gas. If your CO detector goes off, open windows, leave the house, and call 911 or the fire department first. After the home is cleared, call us to inspect the furnace and venting. Do not run the furnace again until a trained technician has checked it.
Our Process, Step by Step
- 1
You call, a person answers. No phone tree, no voicemail. We take your information, ask what the furnace is doing, and set a window that works for you. Same-day appointments are available most days, and 24/7 emergency dispatch is always on.
- 2
The technician arrives inside the window. Our techs are uniformed, background-checked, and driving marked vans. You’ll know who is coming before they arrive. They’ll put on shoe covers at the door and ask where the furnace is before touching anything.
- 3
Diagnosis with a written price. We test the system with a digital multimeter, manometer for gas pressure, and carbon monoxide meter at the flue. After the diagnosis is confirmed, we write down exactly what’s wrong, what it costs to fix, and what the repair includes. You approve it before we start.
- 4
Repair done by the book. We install OEM or equivalent parts, calibrate gas pressure to manufacturer spec, cycle the furnace multiple times to confirm it fires correctly, and test the safety switches. When done, we clean the work area and walk you through what was replaced and why.
- 5
Written guarantee and follow-up. Every repair carries a written one-year guarantee. If the same repair fails within that year, we return at no charge and make it right under the 365-Day Done Right Promise. The Garrison Code is our standard, and Marco Benitez enforces it on every single call.
How Much Does Furnace Repair Cost in Fort Worth?
A typical furnace repair in Fort Worth runs $150 – $700, with most jobs falling between $200 and $450. An ignitor replacement is usually $150 – $300. A flame sensor cleaning or replacement runs $100 – $250. A blower motor replacement lands between $400 and $700 depending on the furnace brand and motor type. A gas valve replacement is typically $300 – $550. These are the prices you’ll see in writing before any work begins at Dalton Heating & Air.
What affects the price: the failed component, the brand and age of your furnace, and whether the part is stocked on our truck or requires an order. Older furnaces or less common brands sometimes need a part ordered from the manufacturer, which adds a day or two but not a markup. The best way to avoid overpaying is to demand the price in writing before the work starts, and to ask what the guarantee covers. Our free estimate includes the full diagnosis, so you know exactly what you’re approving. Call (817) 730-5369 for an exact quote, no obligation.
Our Service Area Near Fort Worth
Dalton Heating & Air Fort Worth serves the entire Fort Worth metro, including Mansfield, Haltom City, Burleson, Colleyville, White Settlement, Forest Hill, River Oaks, Sansom Park, Lake Worth, Richland Hills, and Saginaw. Typical response time is same-day for calls placed before 2 PM, and our Furnace Repair in Mansfield coverage reaches the south metro within the hour during emergencies. If you’re in Furnace Repair in Haltom City territory, dispatch runs just as fast. Call and we’ll give you a straight answer on arrival time for your specific neighborhood.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Fort Worth
Furnace repair is the diagnosis and replacement of failed components in a residential heating system, from ignitors and flame sensors to gas valves and blower motors. In Fort Worth, most Furnace Repair in Mansfield and surrounding areas are completed in a single visit by a trained HVAC technician. Dalton Heating & Air includes a written price before work starts and a one-year written guarantee on every repair.
Most furnace repairs in Fort Worth take between one and two hours from diagnosis to completed work. Simple jobs like ignitor or flame sensor replacement are often done in under an hour. If a part must be ordered for an uncommon brand, we’ll give you a clear timeline and schedule the return visit before we leave.
Furnace repair in Fort Worth typically costs $150 – $700, with most homeowners paying $200 – $450 for common failures like ignitors, flame sensors, and pressure switches. Larger components like blower motors and gas valves land at the higher end of the range. Dalton Heating & Air gives you the exact price in writing after diagnosis, before any work begins. Call (817) 730-5369 for a free estimate.
Yes, we service Bryant furnaces and stock common Bryant OEM parts on our trucks. Our technicians are factory-trained on Bryant’s diagnostic procedures and communicating thermostat systems. The written price and one-year guarantee apply the same as any other brand we repair.
Yes, Dalton Heating & Air Fort Worth runs 24/7 emergency dispatch with a live person answering the phone around the clock. Emergency repairs carry no overtime surcharge, and our trucks stay stocked through winter for common failures. If your heat is out during a freeze, call (817) 730-5369 and we’ll get a technician dispatched.
Every furnace repair from Dalton Heating & Air includes a written one-year guarantee through the 365-Day Done Right Promise. If the same repair fails within that year, we return at no charge and fix it. That’s the Garrison Standard, and it applies to every job without exception.
Clear a path to the furnace and make sure the area around it is accessible. Note any unusual smells, sounds, or error codes on the thermostat. If the CO detector has gone off, open windows and wait outside before calling us. Our technician will handle the rest from diagnosis to written quote to completed repair.
Schedule Your Furnace Repair Service in Fort Worth Today
Call (817) 730-5369 for a free estimate on furnace repair in Fort Worth. A live person answers 24/7, and most repairs are completed same-day with a written price and a full-year guarantee. Marco Benitez and the Dalton Heating & Air team are ready to get your heat back on tonight.
Written by Marco Benitez, Owner at Dalton Heating & Air, serving Fort Worth since 2003.