Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterAC Installation in Fort Worth, TX
A new AC installation in Fort Worth typically runs $6,400 to $13,800 depending on system size, efficiency rating, and ductwork condition, with most standard 3-ton systems landing between $7,200 and $9,500. We install York, Daikin, Bryant, and American Standard equipment, and every quote is written down before any work starts. If you’re replacing a system that’s over 12 years old or facing a repair bill north of $3,000, installation is usually the smarter money. Call (817) 730-5369 and we’ll give you a straight answer on what your home actually needs. For a broader look at what we do, see our AC Repair & Installation page.
We’re part of Garrison Partners, operating under The Garrison Standard since 2003. That means one thing for Fort Worth homeowners: written pricing, on-time arrival, and a full-year written guarantee on the work. No exceptions, no fine print.
Key Takeaways
- Most Fort Worth AC installations cost between $7,200 and $9,500 for a standard 3-ton system.
- Every quote is in writing before any work begins, and the installation is covered by the 365-Day Done Right Promise.
- We service and install nine major brands, including York, Daikin, Bryant, and American Standard.
- Fort Worth summers push AC systems hard. If yours is over 12 years old or needs a compressor replacement, a new installation often pays for itself within 5 years.
- Live phone support, 24/7. A real person answers. Call (817) 730-5369.
When You Need AC Installation
Installation is not always the first answer. Sometimes a repair gets you through another season. But there are clear signals that replacement is the right call. Here’s what we see across Fort Worth neighborhoods like Wedgwood, Ryan Place, and Summer Creek:
- Your system is over 12 years old. Most AC units in Texas are designed for 12 to 15 years of service. At that age, efficiency drops fast and major repairs start stacking up.
- Your compressor has failed. A compressor replacement often costs $3,500 to $5,000 on an older unit. On a 10+ year system, that’s money better spent toward a new installation.
- Your refrigerant is R-22. R-22 (Freon) was phased out years ago. Recharging an R-22 system now costs $200 to $400 per pound in Fort Worth, and the supply keeps shrinking. Upgrading to an R-410A or newer system eliminates that recurring cost.
- Your energy bills keep climbing despite regular service. A 12-SEER unit running hard through July and August in Tarrant County will cost noticeably more than a modern 16-SEER unit. The difference shows up on every summer bill.
- Your home is new to you and the AC came with it. If you bought a house in Fairmount or Arlington Heights and the AC looks original to the 1990s or early 2000s, you’re likely inheriting a replacement in the near future. Better to plan for it than wake up to a dead system in August.
- Your ductwork was installed with the original house. Leaky, undersized, or collapsed ducts force even a new unit to work harder than it should. When we install, we assess the duct system and tell you honestly if it needs attention first.
Our AC Installation Process
Here’s how an installation with Dalton Heating & Air Fort Worth works, step by step:
- Call and talk to a real person. You reach us at (817) 730-5369 any time, day or night. We schedule a visit inside a stated window. You’ll know who is coming before they arrive: background-checked, uniformed technicians.
- Load calculation, not guesswork. On-site, we measure your home’s square footage, ceiling height, window count and orientation, insulation levels, and existing ductwork. This is a Manual J load calculation, and it tells us the exact cooling load in BTUs. No “your old unit was a 3-ton so we’ll put in a 3-ton” thinking.
- Written quote with options. We present you with two or three system options, usually across efficiency levels. Each option has the equipment model, SEER2 rating, labor, electrical work, refrigerant lines, condensate drain, and any duct modifications spelled out in writing. The price you see is the price you pay. No surprises at the end.
- Installation day. Our crew arrives in the stated window. We protect your floors, remove the old equipment, install the new system to code, and leave the site clean. Most residential installations are completed in one day.
- Startup and walkthrough. We run the system, measure refrigerant pressures and temperature drop, and confirm airflow. Then we walk you through the thermostat, filter changes, and what to expect from your new unit.
- Written guarantee, full year. Every installation includes the 365-Day Done Right Promise in writing. If anything about the install is not done right, we make it right within the year. If a repair tied to the installation fails in that window, we return at no charge.
AC Installation Pricing in Fort Worth
We quote in writing, and we quote honestly. Here are the realistic ranges we see across Fort Worth for a full AC Replacement, including equipment, labor, and standard electrical and refrigerant line work:
| System Type | Cooling Capacity | Typical Installed Cost in Fort Worth |
|---|---|---|
| Standard efficiency, single-stage (14 – 15 SEER2) | 3-ton | $7,200 – $8,800 |
| Standard efficiency, single-stage (14 – 15 SEER2) | 4-ton | $8,200 – $9,800 |
| High efficiency, two-stage (16 – 17 SEER2) | 3-ton | $8,800 – $10,500 |
| High efficiency, two-stage (16 – 17 SEER2) | 4-ton | $9,800 – $11,800 |
| Premium, variable-speed (18 – 20+ SEER2) | 3 – 5-ton | $11,500 – $14,500+ |
What moves the number:
- Ductwork condition. If your existing ducts are undersized or leaking, we may recommend sealing or replacement. In older Fort Worth homes, especially in the historic districts, this can add $2,000 to $5,000 to the job. We will always show you the breakdown in writing.
- System brand and efficiency. York and Bryant tend to land in a similar price band for standard efficiency. Daikin and American Standard offer excellent higher-efficiency options that cost more up front but reduce monthly bills.
- Electrical panel capacity. Some older homes need a panel upgrade or new circuit. We’ll flag it before we quote, not after.
- Access. Attic installations in mid-century ranches with tight access hatches can add labor. We tell you what to expect before the work starts.
The Garrison Standard means your installation price is in writing before any work begins, always. If the scope changes, we get your sign-off on a written change order. You are never surprised at the end.
Get a free estimate by calling (817) 730-5369. The estimate visit is free, and the quote you receive is yours to keep, no obligation.
FAQs – AC Installation
How much does AC installation cost in Fort Worth?
A full AC installation in Fort Worth typically costs $7,200 to $9,500 for a standard 3-ton system, and $8,800 to $14,500+ for higher-efficiency or larger systems. The exact number depends on your home’s size, ductwork, and the system you choose. Call (817) 730-5369 for a free written estimate.
Can you install my AC the same day?
In most cases, we schedule installations within 48 to 72 hours of the estimate, not the same day. Installation is a full-day job that requires proper load calculations, equipment ordering, and scheduling. If you have an emergency no-cool situation, we offer AC Repair & Installation Near Me in Fort Worth, TX and can often get you a temporary solution while your system is on order. Call us and we’ll tell you honestly what the timeline looks like.
Is it cheaper to repair or replace my AC?
If the repair costs more than 40% of a new system, or if your unit is over 12 years old and needs a major component like a compressor, replacement is usually the better long-term decision. We’ll show you the numbers for both options and let you decide, with no pressure either way.
What brands do you install?
We install and service nine major brands, including York, Daikin, Bryant, and American Standard. Our technicians are factory-trained on all nine, so you’re not locked into one brand. We’ll recommend the system that fits your home and budget, and we’ll explain why.
Do you offer financing for AC installation?
Financing options are available through third-party providers, and we can walk you through the application process during your estimate visit. The quote is in writing, and you’ll know the full cost and payment options before you decide.
Why Fort Worth Homeowners Choose Dalton Heating & Air
We know the pattern. A technician shows up late, quotes one number on the phone and a different number at the door, and leaves before the job is fully done. That’s exactly what The Garrison Standard was built to eliminate.
Since 2003, Garrison Partners locations have operated by one code: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. We don’t ask you to trust us on faith. You get a written quote and a written guarantee. If the work doesn’t hold up within 365 days, we return at no charge. That’s the Done Right Promise, and it applies to every installation and every repair.
Our technicians are background-checked and uniformed. You’ll know who is showing up before they arrive. And when you call at 2 a.m. because your system quit during a July heat wave, a live person answers. Every time.
Marco Benitez leads the Dalton Heating & Air Fort Worth team. We serve Fort Worth proper and surrounding Tarrant County communities, including AC Repair & Installation in Fort Worth and nearby areas. If your system is done, we’ll tell you straight. If it has a season or two left, we’ll tell you that too.
Ready to get a written estimate? Call (817) 730-5369 today. A real person will answer, and your estimate is free.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Worth, serving Fort Worth.