Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Replacement in Fort Worth, TX
If your furnace is over 15 years old, needs frequent repairs, or your heating bills keep climbing despite regular service, it’s time to consider furnace replacement in Fort Worth. A new furnace typically costs between $4,200 and $8,900, installed, depending on the size of your home and the efficiency rating you choose. Dalton Heating & Air Fort Worth installs replacement furnaces with written pricing before any work starts and a full-year guarantee on the entire install.
Replacing a furnace is not a repair call. It’s a project that involves load calculations, duct assessment, possible gas line work, and a city inspection. Getting the details right matters. As a home comfort company held to The Garrison Standard since 2003, we’ve handled furnace replacements across Fort Worth neighborhoods from Ridglea Hills to Wedgwood to far north Tarrant County. Our Heating & Furnace in Fort Worth team walks every customer through the same sequence: measure, quote in writing, install to code, test, and leave the house clean. The price you sign is the price you pay. If anything is not done right, our 365-Day Done Right Promise means we return and make it right at no charge.
Call (817) 730-5369 any time to schedule a replacement quote. A live person answers, 24/7.
When You Need Furnace Replacement
Here’s what we tell Fort Worth homeowners who call asking whether to repair or replace. None of these signals alone is decisive, but two or more usually point to replacement:
- Age over 15 years. Most furnaces in Fort Worth last 15 to 20 years. The strain of irregular Texas winters means the heat exchanger and blower motor see cycles that cause metal fatigue earlier than in colder climates.
- Repair costs adding up. If you’ve spent $600 or more on repairs in the past two years, or a technician has told you the heat exchanger is cracked, the math starts tilting toward replacement rather than another band-aid.
- Uneven heating between rooms. When a furnace can’t push air effectively to bedrooms on the far end of the house, it’s often a sign the unit is undersized for the current duct layout or has lost capacity over time. Homes in older Fort Worth neighborhoods like Ryan Place or Mistletoe Heights frequently have original ductwork sized for a furnace from three decades ago.
- Rising gas bills without higher usage. If your Atmos Energy bill climbs year over year while your thermostat habits haven’t changed, the furnace’s efficiency rating, called AFUE (Annual Fuel Utilization Efficiency), is slipping. A 20-year-old unit operates around 65 to 70 AFUE. A new furnace runs 80 to 96 AFUE.
- A yellow flame or soot around the burner area. A healthy furnace burns blue. Yellow flame or black soot means incomplete combustion, which points to a possible heat exchanger crack. That’s a carbon monoxide risk, not a routine maintenance item. If you see this, call us at (817) 730-5369 right away.
- Frequent cycling on and off. Short cycles wear out the ignitor and blower motor prematurely. If the furnace turns on, runs three minutes, shuts off, then repeats, something fundamental is wrong, and repairs on an old unit often cost more than the unit is worth.
Our Furnace Replacement Process
We run every replacement in Fort Worth through a set sequence. It’s the same discipline we’ve operated under since 2003, and it’s written into The Garrison Code every Dalton technician follows.
- Load calculation first, not guesswork. We measure square footage, window area, ceiling height, and insulation levels. We don’t size by “what was there before.” An oversized furnace short-cycles, wastes gas, and never heats evenly. Undersized means cold spots in January. We take the time to get it right.
- Written quote with line-item pricing. You get the equipment cost, labor, duct modifications if needed, thermostat, and any disposal fees listed in writing. No number changes at the door. The Garrison Standard requires the written price before any work begins, on every job, without exception.
- Equipment selection based on your budget and house, not commission. We’re factory-trained to service and install nine major brands, including York, Daikin, Bryant, and American Standard. We’ll show you what each option costs and what the efficiency difference means in dollars on your gas bill, then you decide.
- Installation day, done by the book. Background-checked, uniformed technicians arrive inside the stated window. We protect floors, remove the old furnace, set the new one, connect gas lines and flue piping properly, and check static pressure and airflow. A furnace replacement in Fort Worth requires a city permit and inspection. We pull the permit and stand behind the inspection.
- System test before we leave. We fire the unit, verify gas pressure, check for leaks at every joint, confirm proper venting, and measure supply and return air temperatures. You get a walkthrough of the new thermostat and filter access. We leave the site clean. No scrap, no screws, no boxes.
- Written guarantee, not a verbal promise. Every install includes our 365-Day Done Right Promise in writing. If the work doesn’t hold, we come back at no charge within that full year. That’s not an upgrade or a warranty upsell. It’s standard.
Furnace Replacement Pricing in Fort Worth
What does a furnace replacement actually cost in Fort Worth? Most single-family homes in Tarrant County fall between $4,200 and $8,900, installed, before any utility rebates. Here’s a realistic breakdown:
- Basic 80% AFUE single-stage furnace: $4,200 to $5,500. Reliable, straightforward, best for smaller homes or tighter budgets.
- Mid-range 92-95% AFUE two-stage furnace: $5,500 to $7,200. Better efficiency, quieter operation, more even temperatures. This is the range most Fort Worth owners choose.
- High-efficiency 96-98% AFUE modulating furnace: $7,200 to $8,900. The quietest and most comfortable option, with the lowest long-term operating cost. Makes the most sense in larger two-story homes.
- Duct modifications or new plenum: $400 to $1,200, depending on what the existing supply and return setup requires. Older homes in neighborhoods like Berkeley Place or Oakhurst often need this.
- New thermostat with the install: $150 to $400, including smart thermostat options that can reduce runtime when you’re away.
Three things move the number: furnace size (measured in BTUs), efficiency tier, and whether the existing duct connections fit the new cabinet cleanly. Gas line work, if the existing line is undersized for a larger furnace, adds cost. We give you the full written quote before you commit.
Call (817) 730-5369 for a free estimate. The quote is specific to your house, not a range pulled from a national average. We come out, measure, and hand you a number in writing. No obligation, and the price doesn’t change later.
FAQs – Furnace Replacement
How much does it cost to replace a furnace in Fort Worth?
A furnace replacement in Fort Worth typically runs between $4,200 and $8,900 installed, with most single-family homes landing in the $5,500 to $7,200 range for a mid-efficiency two-stage unit. The final number depends on the furnace’s BTU output, efficiency tier, and whether ductwork needs modification. Call (817) 730-5369 for a free written quote specific to your home.
How long does a furnace replacement take?
A standard furnace replacement takes one full day, typically 6 to 8 hours, for a straightforward swap with no duct modifications. If the job includes new duct sections, a new plenum, or gas line resizing, expect a second day or a long first day. We’ll tell you before we start what the timeline looks like, in writing.
Is it better to repair or replace a furnace?
If the furnace is over 15 years old and the repair quote is more than $500, replacement usually makes more financial sense than repair. A cracked heat exchanger is the hard stop: that’s a safety issue, not a repair decision. For older furnaces, repeated repairs add up faster than a new unit’s monthly payment would.
Can you replace a furnace in the winter in Fort Worth?
Yes. Winter is actually a common time for furnace replacement in Fort Worth because failures spike during the first hard cold snaps of December and January. We stock common replacement sizes and can typically install within 24 to 72 hours of your signed quote, depending on equipment availability. Call (817) 730-5369 and we’ll get you scheduled immediately.
Do I need a permit to replace a furnace in Fort Worth?
Yes. The City of Fort Worth requires a mechanical permit for furnace replacement, and the work must pass a city inspection. We pull the permit, schedule the inspection, and handle it all. Any contractor who says they’ll skip the permit is putting you at risk with your homeowner’s insurance.
If your furnace is at the end of its life, replacing it before it fails in the middle of a Fort Worth cold snap is the smart move. Dalton Heating & Air Fort Worth has been installing and replacing furnaces since 2003, with written pricing, background-checked technicians, and a 365-Day Done Right Promise on every install. Call (817) 730-5369 now. We’ll show up, measure, and hand you a written quote. You decide from there.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Worth, serving Fort Worth.