Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heat Pump Installation Across Burleson
A new heat pump installation in Burleson typically runs $3,500 to $7,500 depending on system size, efficiency rating, and whether your home needs duct or electrical work before the unit goes in. Most jobs take one full day, and we schedule around your availability, not the other way around. Our crews know the difference between a 1970s pier-and-beam house near Old Town Burleson and a new build in Mistletoe Hill, and that local knowledge changes how the job gets done. Call (817) 730-5369 and we’ll give you a written price before any work starts.
Why Dalton Heating & Air Fort Worth Is Burleson’s Preferred Heat Pump Installation Company
We show up inside the window we give you. That’s not a slogan here; it’s a rule our techs live by, and it’s written into The Garrison Code every Dalton crew member follows. When a Burleson homeowner schedules a heat pump install, they get a background-checked, uniformed technician who arrives with the truck stocked for the job, not someone who has to run back to the supply house twice.
The Garrison Standard has governed our work since 2003. It means the price goes in writing before any work begins, the job is done by the book, and the site is left clean. If something isn’t right, our 365-Day Done Right Promise covers it for a full year. Burleson homeowners reach out because they’ve been burned by no-shows and door-price changes; we built our process to be the opposite.
Marco Benitez leads our team with a simple rule: a heat pump install is only done when the static pressure, airflow, and electrical load all check out. That’s why our installs in Burleson hold up through 100°F summers and the occasional January ice storm. We don’t cut corners on the parts nobody sees.
Styles & brands we work with
Heat Pump Service in Burleson
Heat Pump Service in Burleson means keeping your system from failing during the stretch from June through September when it’s running 14 to 16 hours a day. A service call for a heat pump in Burleson runs $150 to $650 depending on what’s wrong. That covers diagnosis, the repair itself, and a written guarantee on the work. If the repair fails within the guarantee period, we come back at no charge.
Seasonal Tune-Up Before Summer Hits
A tune-up in Burleson costs $80 to $200 and covers coil cleaning, refrigerant check, electrical connection tightening, and airflow testing. For older homes near Old Town Burleson, we pay special attention to evaporator coil condition, because sagging flex duct and undersized returns cause freeze-ups that a basic tune-up won’t fix. The report we hand you lists what we found and what it means in plain terms.
Freeze-Up Diagnosis and Airflow Correction
When a heat pump freezes up in Burleson’s east side neighborhoods, the cause is rarely the refrigerant. It’s usually restricted airflow from collapsed duct, a dirty blower wheel, or a return that was undersized when the house was built. We measure static pressure on every service call, because swapping parts without checking airflow just means the same freeze-up comes back in August.
Heat Pump Replacement in Burleson
Heat Pump Replacement in Burleson means pulling out an old, failing unit and installing a correctly sized system that matches your home’s actual heating and cooling load. A full replacement in Burleson runs $3,500 to $7,500, which lines up with the AC installation range for this market. The final price depends on system efficiency, whether ductwork needs sealing or modification, and whether your electrical panel can handle the new unit’s startup draw.
Full System Replacement with Duct Assessment
In older Burleson homes, especially those with slab or pier-and-beam foundations, we don’t do a like-for-like tonnage swap. We run a load calculation, measure static pressure, and inspect the duct system before recommending equipment. If your 1970s return is too small, a new high-efficiency heat pump will still struggle and freeze. Fixing the return and sealing the duct can cost more upfront, but it’s the difference between a system that works and one that doesn’t.
Variable-Speed Heat Pump Upgrades
Variable-speed heat pumps are a strong fit for Burleson’s climate. They run longer at lower capacity, which handles humidity better during summer and maintains steadier temperatures during cold snaps. Homes in newer subdivisions like Shannon Creek often already have the electrical capacity and sealed ductwork these units need. Older homes may need a panel upgrade first, and we’ll tell you that in writing before you commit to anything.
Trusted Brands We Service in Burleson
We’re factory-trained on nine major residential brands, including York, Daikin, Bryant, and American Standard. That means when a Burleson homeowner calls with a Bryant unit acting up or wants a Daikin variable-speed system installed, we’re not reading the manual for the first time in your driveway. We keep common replacement parts stocked for fast turnaround, and when a part has to be ordered, we tell you exactly when it arrives and when the job gets done.
See the difference
Before
After
Before
After
Before
AfterCommon Heat Pump Installation Problems We See in Burleson Homes
- Undersized return air in pier-and-beam homes: Houses near Old Town Burleson with original ductwork often have returns that pull less air than the system needs. The evaporator coil freezes, the blower motor strains, and the new heat pump fails early. We correct the return before we install.
- Sagging flex duct in humid summers: Burleson’s summer humidity softens and sags older flex duct, which chokes airflow and causes coil freeze-ups. Newer subdivisions rarely have this problem, but 1980s-era homes throughout the city’s east side see it constantly. Sealing and re-supporting the duct is part of a proper install.
- Electrical panels that can’t handle modern heat pumps: 1960s to 1980s Burleson homes often have 100-amp panels with no room for a new circuit. Variable-speed heat pumps draw less at startup than older single-stage units, but if your panel is maxed out, the breaker will trip. We inspect the panel and tell you in writing if an upgrade is needed.
- Like-for-like swaps that leave houses undercooled: The original system in many Burleson homes was oversized to compensate for leaky ductwork. When you seal the ducts and replace with the same tonnage, the house may still be uncomfortable on 100°F days. A load calculation prevents you from paying twice.
Pricing for Heat Pump Installation in Burleson, TX
A new heat pump installation in Burleson runs $3,500 to $7,500 for the equipment and labor. Basic single-stage units with a standard efficiency rating land on the lower end. Variable-speed systems with higher SEER2 ratings push toward the upper end, especially if duct modification or an electrical panel upgrade is required. A tune-up for an existing heat pump runs $80 to $200, and service calls for repairs run $150 to $650. Every quote is in writing before any work begins, and that price doesn’t move at the door. Call (817) 730-5369 for a free estimate; we’ll send a tech to your Burleson home, not a salesperson with a binder.
We Also Serve Cities Near Burleson
Our Heat Pump Installation team covers Burleson and the surrounding communities south of the metroplex. We regularly work in Mansfield, Fort Worth, Haltom City, and Colleyville, which means parts runs are quick and dispatch understands the area. If you live just outside Burleson proper, call us anyway; chances are we’re already in your neighborhood.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Burleson
Older Burleson homes, especially pier-and-beam houses near Old Town Burleson, often have undersized return air and sagging flex duct that restricts airflow across the evaporator coil. When airflow drops, the coil gets too cold and freezes. Newer subdivisions like Mistletoe Hill were built with larger returns and tighter ductwork, so freeze-ups are rare. The fix is a duct assessment and return correction before or during installation, not more refrigerant. Call (817) 730-5369 and we’ll measure your static pressure before recommending anything.
Sometimes, but not always. If your ductwork is sealed, properly supported, and sized for the system’s airflow requirements, you can keep it. If it’s sagging, leaky, or has an undersized return, the new heat pump will underperform and may freeze. In many 1970s Burleson homes, we recommend sealing and re-supporting the duct as part of the install, which costs less than full replacement but makes a measurable difference.
It depends on your panel’s current load and available breaker space. Many 1960s to 1980s Burleson homes have 100-amp panels that are already near capacity. Variable-speed heat pumps draw less current at startup than older single-stage units, but they still need a dedicated circuit. If your panel is full or undersized, we’ll tell you in writing and include the upgrade cost in your quote before any work starts.
Modern heat pumps handle Burleson’s winter cold snaps on their own down to well below freezing. Burleson sits in USDA hardiness zone 8a, so hard freezes are occasional rather than sustained, and a properly sized heat pump covers those without a furnace backup. The key is correct sizing; an undersized heat pump will struggle, while a properly sized variable-speed unit will maintain temperature even when it drops into the 20s.
SEER measured cooling efficiency under older test conditions; SEER2 uses updated testing that better reflects real-world ductwork and static pressure. A unit rated 16 SEER might be 15 SEER2 or lower. Burleson’s heavy cooling season makes this worth paying attention to, because a higher SEER2 rating means lower summer electric bills. We’ll compare ratings and estimated operating costs in writing so you’re comparing apples to apples.
Ready to get a fixed price on heat pump installation in Burleson? Call (817) 730-5369 today. The estimate is free, it’s in writing, and the number doesn’t change when the crew arrives.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Worth, serving Burleson under The Garrison Standard.