Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heat Pump Installation Across Colleyville
Heat pump installation in Colleyville typically runs $3,500 – $7,500 for a complete system replacement, depending on home size, zoning needs, and equipment efficiency. Most Colleyville jobs take one to two days once equipment is on hand, and we schedule around your family’s routine, not the other way around. If you’re replacing an aging AC with a heat pump or building a custom home, call (817) 730-5369 for a written, no-surprise quote from Dalton Heating & Air Fort Worth.
Colleyville homes are different from what we see in most Texas suburbs. These are large custom builds and estate properties with high ceilings, multiple systems, and attics that run hot enough to cook a sheet of cookies in August. We know those attics. We know the neighborhoods off Glade Road, the gated communities near Montclair Parc, and the two-story brick homes along Pool Road where zoning means the upstairs and downstairs never fight over the same thermostat. When our technicians roll into Colleyville, they already know what the house is likely to throw at them.
Why Dalton Heating & Air Fort Worth Is Colleyville’s Preferred Heat Pump Installation Company
Colleyville homeowners hire us because we put the price in writing before any work starts. That’s not a promo line. It’s the Garrison Standard, and Marco Benitez holds every Colleyville job to it. You get a written price, a written guarantee on the install, and a crew that shows up in uniform, background-checked, and on time.
Our local reputation in Colleyville is built on jobs in the city’s larger homes, where a single mistake can mean a family sweating through a July night or paying $600 electric bills for air that leaked into the attic. Homeowners here have told us they’re done with companies that quote one number on the phone and a different one at the door. So the number we write down is the number you pay. Period.
Response time to Colleyville matters when a heat pump fails in July. Our Dallas-Fort Worth dispatch coordinates Colleyville-area crews specifically, so we’re typically on-site within a day for scheduled installs, faster for emergency diagnostics. If a system we installed has an issue that’s covered by our guarantee, we come back free. A full year. That’s the Done Right Promise, and it’s not a 30-day window.
Marco Benitez, who leads Dalton Heating & Air Fort Worth, is the one who signs off on the Colleyville install standards. When a homeowner in Remington Park or along John McCain Road calls with a question after the install, that concern lands on his desk until it’s answered.
Styles & brands we work with
Geothermal Heat Pump Installation in Colleyville
Geothermal Heat Pump Installation in Colleyville means putting the earth to work as your heat source in winter and your heat sink in summer. For a large Colleyville estate with high ceilings and multiple zones, geothermal can cut annual heating and cooling costs by 30 – 50% compared to a standard air-source heat pump, because the ground stays around 60 – 65°F all year while the Texas air swings from 15°F to 105°F. The job involves drilling a ground loop or trenching a horizontal loop, installing a geothermal unit (usually in a mechanical room or garage), and tying it into your existing ductwork and zoning controls. In Colleyville, the bigger the home and the higher the summer cooling load, the faster geothermal pays for itself.
Sizing and Loop Design
Manual J load calculations are non-negotiable for geothermal in Colleyville because oversized equipment costs more to drill for and never dehumidifies correctly. We run the numbers on every zone before we ever quote a loop length.
Local Costs and Expectations
A geothermal heat pump install in Colleyville generally lands between $3,500 and $7,500 for the heat pump itself, with the ground loop and drilling often adding significantly depending on lot size and soil. Big lots around Colleyville give us room for horizontal loops, which usually drill cheaper than vertical boreholes. Call (817) 730-5369 and we’ll price your lot and load honestly.
Ductless Heat Pump Installation in Colleyville
Ductless Heat Pump Installation in Colleyville is the cleanest fix for additions, sunrooms, detached garages, or media rooms where existing ductwork would be a nightmare to extend. These systems pair an outdoor condensing unit with slim indoor wall, ceiling, or floor-mounted heads. No ducts, no attic air loss, no tearing out drywall. In Colleyville homes with attic ducts that are already leaking like a screen door, a ductless unit for a new space often outperforms the central system for that one room.
Where Colleyville Homeowners Use Ductless
We install ductless units in detached garages and workshop spaces around Colleyville where running new duct would cost more than the equipment. We also see them in master suite additions where the original system just wasn’t sized for the square footage.
What Ductless Costs Here
A single-zone ductless heat pump install in Colleyville typically runs $3,500 – $7,500 depending on the number of indoor heads and the SEER2 rating you choose. The higher end of the range usually means multiple zones or a cold-climate model. Written estimate before we order anything.
Trusted Brands We Service in Colleyville
Our techs are factory-trained to install and service Rheem, York, Daikin, and Bryant heat pumps, along with Carrier, Trane, Lennox, Goodman, and American Standard. What that means in Colleyville is we don’t show up and learn your unit on your dime. We stock common local parts in our Dallas-Fort Worth supply chain so a compressor swap or a control board replacement in Colleyville doesn’t leave you waiting a week while a part ships from Ohio. If your custom home runs a Bryant Evolution system or a Daikin multi-zone, we know the sequence of operations, not just the badge on the side.
Common Heat Pump Installation Problems We See in Colleyville Homes
- Attic flex duct leakage on homes built in the 1990s and 2000s. In neighborhoods like Montclair Parc and Remington Park, original flex ducts have cooked in 30 years of North Texas attic heat. They collapse, tear, or separate at the connections, and a brand-new heat pump can’t fix that. Conditioned air ends up in a 140°F attic instead of your living room.
- Skipped static pressure testing during commissioning. If a crew doesn’t measure airflow and set the blower speed, the new heat pump may freeze the evaporator coil or fail to dehumidify. High static pressure in Colleyville’s long duct runs on two-story homes is common enough that we check it on every install.
- Reusing old line sets without flushing. When an R-22 system is torn out and a new heat pump goes in, leftover mineral oil in the old copper lines can contaminate the new refrigerant. On Colleyville’s multi-zone custom homes, that contamination can kill a compressor within a year. We flush or replace line sets. No shortcuts.
- Oversized equipment that short-cycles. Original systems on many Colleyville estates were sized by rule of thumb, not load calculation. An oversized 5-ton on a home that needs 3.5 tons will short-cycle, leave humidity high, and wear out early. We run a Manual J load calculation on every heat pump install before we recommend a thing.
See the difference
Before
After
Before
After
Before
AfterPricing for Heat Pump Installation in Colleyville, TX
A complete heat pump installation in Colleyville runs $3,500 – $7,500 for most homes. The spread comes from three things: the SEER2 rating you select (higher efficiency costs more up front, but Colleyville’s summer electric rates reward it monthly), the number of zones and duct modifications needed, and whether the job includes fixing existing attic duct leakage. A variable-speed system in a two-story custom home will land at the higher end. A straightforward single-zone swap on a ranch-style home off Cheek-Sparger Road will land lower. We give you a written price before any work is ordered, and that price holds. Call (817) 730-5369 and we’ll put a real number on your house.
We Also Serve Cities Near Colleyville
Our Heat Pump Installation crews cover Colleyville and the surrounding communities, including Haltom City, Fort Worth, Mansfield, and Burleson. If you’re just outside Colleyville and need a written heat pump quote, call (817) 730-5369 and we’ll tell you straight whether we serve your street.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Colleyville
The most common mistake is installing a new heat pump without inspecting and testing the existing ductwork. In Colleyville’s custom-home neighborhoods like Montclair Parc and Remington Park, degraded flex ducts leak enough conditioned air into the attic that even a perfectly sized, high-efficiency heat pump can’t maintain humidity or comfort. We test static pressure and duct leakage on every install. Call (817) 730-5369 for a free estimate that includes a duct inspection.
You likely need duct replacement if your summer electric bills in Colleyville run well above your neighbors with similar homes, if some rooms never reach the same temperature as others, or if you can see collapsed or torn flex ducts in your attic. On homes built in the 1990s and 2000s around Colleyville, original flex ducts are often past their useful life. We include a static pressure reading and a visual duct inspection before we quote a heat pump install.
Yes, a properly sized variable-speed heat pump handles Colleyville’s heat and humidity well because it runs long, low-stage cycles that pull moisture out of the air instead of blasting cold air for ten minutes and shutting off. The catch is the sizing has to be right from a real Manual J load calculation, not a rule of thumb. Oversized variable-speed systems still short-cycle and leave humidity high. We size every Colleyville install by the load, not the square footage.
Commissioning is the start-up procedure where we set the blower speed, check refrigerant charge by superheat and subcooling, verify static pressure, and test zoning controls. In Colleyville, skipping commissioning on a multi-zone custom home means the system never delivers the efficiency or comfort the label promises. One Montclair Parc retrofit we did showed static pressure at 0.9 inches, double the design target. After re-commissioning with corrected ductwork and blower settings, the homeowner’s August bill dropped $140 and indoor humidity held steady at 50%.
A ductless heat pump is often the best fit for a Colleyville addition or detached garage because it avoids extending leaky, undersized ductwork through a hot attic. These units deliver quiet, zone-specific heating and cooling without the air loss that plagues many Colleyville central systems. We install single-zone and multi-zone ductless systems, and a standard single-zone install typically runs $3,500 – $7,500. Call (817) 730-5369 for a flat, written quote on your addition or garage.
Call Dalton Heating & Air Fort Worth for Heat Pump Installation in Colleyville
If your Colleyville home needs a heat pump installed correctly the first time, call (817) 730-5369. Ask for a free estimate, and we’ll send a background-checked, uniformed technician to take real measurements, not a salesperson with a brochure. The price goes in writing before anything gets ordered, and the install is guaranteed in writing for a full year. That’s how Marco Benitez runs Dalton Heating & Air Fort Worth, and that’s how every Colleyville job goes out the door.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Worth, serving Colleyville and the Dallas-Fort Worth metro.