Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Heat Pump Installation Across Richland Hills
Heat pump installation in Richland Hills typically runs $6,500 – $13,500 for a complete system, including the outdoor unit, indoor air handler, line set, and full commissioning. Most installations wrap up in one to two days, and ductless setups in homes with no attic or rotting ductwork land closer to $4,500 – $9,000 per zone group. If you’re tired of a system that can’t keep up with Texas heat, call Dalton Heating & Air Fort Worth at (817) 730-5369 for a written quote before any work starts.
Richland Hills is not a copy-paste job. The houses here were mostly built between the 1950s and 1970s, and the ductwork, electrical panels, and side yards show it. A heat pump sized for a brand-new tract home in the northern suburbs will not perform the same on a mid-century pier-and-beam ranch off Baker Boulevard. Our crews know the difference because we see it every week.
Why Dalton Heating & Air Fort Worth Is Richland Hills’s Preferred Heat Pump Installation Company
Since 2003, Dalton Heating & Air has operated as a Garrison Partners company held to The Garrison Standard: arrive inside the stated window, put the price in writing before starting, do the job by the book, leave the site clean, and stand behind the work for a full year. That’s not a sales line. It’s the operating code every crew follows on every job in Richland Hills, whether it’s a ductless retrofit near the Richland Hills Public Library or a full system replacement off Handley Drive.
Marco Benitez, who leads our Fort Worth operation, insists that every Richland Hills customer gets a written price before any work begins. No verbal estimate that shifts at the door. No “we found something else” upcharge routine. If the heat pump install doesn’t hold up, the 365-Day Done Right Promise covers it, and we return at no charge.
Our response time to Richland Hills is same-day for service calls and within 48 hours for scheduled installation quotes. We answer the phone with a live person, 24/7. Background-checked, uniformed technicians show up, not a rotating cast of subcontractors. And we’re factory-trained on nine major brands, so we’re not guessing at the wiring diagram on your York or Daikin unit.
Styles & brands we work with
Ductless Heat Pump Installation in Richland Hills
Ductless Heat Pump Installation in Richland Hills is often the cleanest answer when a 1960s home has pier-and-beam construction, no attic to speak of, and original galvanized ducts that have corroded from decades of clay soil moisture. Instead of forcing new ductwork through a house that wasn’t built for it, we mount one or more slim indoor air handlers on walls or ceilings and connect them to a quiet outdoor condenser with a small refrigerant line set. No duct loss. No crawl space mold. No tearing out sheetrock.
Most ductless installations in Richland Hills run $4,500 – $9,000 depending on the number of indoor heads and the system’s capacity. A single-zone setup for a converted garage or a den runs lower; a four-zone system covering a 2,400 sq ft ranch runs higher. Every quote includes the full commissioning sequence, not just a startup test.
Multi-Zone Comfort for Mid-Century Floor Plans
Older Richland Hills homes rarely have balanced airflow. The den bakes while the bedrooms freeze. Ductless lets us put a dedicated indoor unit in each problem room, each with its own thermostat, so a west-facing den on Baker Boulevard isn’t fighting the same setpoint as the shaded back bedroom.
When Ductwork Is Beyond Saving
If your galvanized ducts are leaking 30% or more of your conditioned air, replacing everything gets expensive fast. Ductless removes that equation entirely. No ducts, no duct leakage, and the efficiency rating actually reflects what the system delivers, not what it would deliver in a perfect house.
Heat Pump Service in Richland Hills
Heat Pump Service in Richland Hills means maintaining a system that works nearly year-round. Unlike a furnace that sits idle half the year, a heat pump cools through the long Texas summer and heats through winter cold snaps. That dual duty is exactly why a neglected heat pump in this climate can fail in July, when you need it most.
A tune-up in Richland Hills runs $80 – $200 and includes checking refrigerant charge, testing defrost controls, cleaning the outdoor coil, and measuring temperature split. If something is actually wrong, most heat pump repairs land between $150 and $650. We give the written repair cost before touching a screwdriver, and the repair is guaranteed in writing for a full year. If it fails in that window, our second visit is free.
Seasonal Tune-Ups Before Heat Waves and Cold Snaps
Richland Hills doesn’t get gentle shoulder seasons. The system gets asked to run full-blast in May and again in January. A spring tune-up catches low refrigerant and dirty coils before the 104°F days stack up. A fall check catches defrost board issues before the first hard freeze.
Defrost and Strip Heat Issues in Winter
When a heat pump goes into defrost mode in cold weather, it briefly switches to electric strip heat. If the outdoor unit is starved for airflow from a too-tight side yard, the coil ices over and the system never really comes out of defrost. You get cold air, a tripped panel, and a compressor running far hotter than it should.
Trusted Brands We Service in Richland Hills
Dalton Heating & Air is factory-trained on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. For Richland Hills customers, that means we’re not brand-loyal to one manufacturer and we don’t push a unit just because it’s on the truck. American Standard and Bryant have solid variable-speed options that handle Richland Hills humidity well; Daikin is a common pick for ductless retrofits where attic space is tight. Since our Fort Worth location stocks common parts locally, a mid-repair need for a capacitor or a control board doesn’t mean waiting a week on a parts shipment.
See the difference
Before
After
Before
After
Before
AfterCommon Heat Pump Installation Problems We See in Richland Hills Homes
- Oversized single-stage heat pumps on original 1950s ductwork. The system short-cycles, so it cools the air but never runs long enough to pull humidity out. We’ve found evaporator coils dripping into pier-and-beam crawl spaces, feeding mold. A properly sized variable-speed unit fixes the short-cycling and the moisture, not just the temperature.
- Condensers jammed into tight side yards off Rufe Snow Drive. Original lot lines never anticipated modern AC condensers. When a unit sits under 8 inches from a fence, the coil starves for air, the compressor runs 40°F hotter, and the capacitor dies mid-August. We reposition or spec blowers with higher static pressure capability to compensate.
- Heat pumps sized only for cooling asked to heat through a January cold snap. When outdoor temps hit 20°F, a cooling-sized heat pump can’t pull enough heat from the air. The strip heat kicks on, the original 60A panel trips, and you’re cold. We check panel capacity and heat load before recommending a unit, not after you’ve paid for it.
- Corroded galvanized ductwork leaking conditioned air into the crawl space. Richland Hills clay soil holds moisture, and 60-year-old galvanized ducts don’t survive that forever. Leaks of 30 – 40% are common. We leak-test and either seal, replace, or bypass with ductless, depending on what the house actually needs.
Pricing for Heat Pump Installation in Richland Hills, TX
A complete heat pump installation in Richland Hills runs $6,500 – $13,500. The spread comes down to home size, ductwork condition, panel capacity, and whether we’re doing a straight swap or reconfiguring the footprint to fix a tight side yard. Ductless systems run $4,500 – $9,000. These are written, fixed prices, not starting points. The figure on your quote is the figure on your invoice.
If you’re comparing quotes from other companies, ask them this: does the price include a full commissioning report with measured airflow and temperature split, or just a startup test? We commission every system we install. That’s the difference between a heat pump that actually hits its SEER2 rating and one that just turns on.
Call (817) 730-5369 for a free, written estimate. No pressure, no game.
We Also Serve Cities Near Richland Hills
If you’re in Fort Worth, Mansfield, Haltom City, or Burleson, our Heat Pump Installation crews cover those areas with the same written pricing and full-year guarantee. And if you’re in Richland Hills, we’re already here. Dalton Heating & Air Fort Worth schedules across the metro from a single Dallas-Fort Worth office, so you get the same crew standards and the same Garrison Code on every job.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Heat Pump Installation in Richland Hills
Because the system was either oversized for your ductwork or the ducts themselves were leaking a third of the conditioned air into the crawl space. A heat pump that never reaches setpoint on a 100°F day in Richland Hills is almost always fighting duct leakage or short-cycling, not a refrigerant issue a tune-up can fix. Call (817) 730-5369 and we’ll measure the actual airflow and static pressure, not guess at it.
Sometimes, but not always. If the old condenser had less than 8 inches of clearance on the intake side, the new unit will starve for air the same way the old one did. We can reposition the condenser, build a small pad with proper setback, or select a unit with a blower rated for higher static pressure. We’ll tell you which option fits before you spend a dollar.
No, it’s not the only option, but it’s usually the best one. We can route new ductwork through the crawl space or through closet chases, but that’s invasive and expensive. Ductless avoids the ducts entirely, gives you per-room temperature control, and typically lands in the $4,500 – $9,000 range depending on zones. We’ll quote both so you can see the real difference in writing.
Modern variable-speed heat pumps from Bryant and American Standard run at 45 – 55 decibels, about the level of a quiet conversation. If your current unit is a single-stage from the early 2000s, the new one will be noticeably quieter. We also position units away from bedroom windows and check clearance so the compressor doesn’t have to work harder and louder than it should.
In many mid-century Richland Hills homes, yes. Original 60A or 100A panels often can’t handle a modern heat pump’s strip heat draw during a cold snap. We check your panel capacity during the quote so the upgrade is part of the written price, not a surprise on install day.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Worth, serving Richland Hills and surrounding communities since 2003.