Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox HVAC in Haltom City, TX | Dalton Heating & Air Fort Worth
We provide independent Lennox HVAC service across Haltom City, from our AC Repair in Haltom City on XC21 condensers to full system replacements in mid-century ranch homes. The one thing that makes our Lennox work here different? We know these houses. The 1950s-to-1970s stock off Denton Highway has ductwork, wiring, and soil conditions that punish high-efficiency Lennox equipment in predictable ways, and we plan every repair around that reality. Call (817) 730-5369 for a free estimate.
Why Haltom City Residents Choose Us for Lennox Service
Our crews open Lennox units in Haltom City every week, from 1990s G26 furnaces to modern SL280V systems. We know the exact failure points that North Texas heat, clay soil, and 60-year-old ductwork create for this brand, because we have worked on them in hundreds of homes across this city. Marco Benitez, our owner, learned the trade at Los Angeles Trade-Technical College and spent close to two decades on HVAC systems across the Southwest before putting down roots here. He’s known for diagnosing Lennox refrigerant and airflow problems that other techs have already looked at and missed. Every job gets written pricing before any work starts and a written guarantee on the repair for a full year, covered by the 365-Day Done Right Promise.
Styles & brands we work with
Common Lennox HVAC Problems We Solve in Haltom City
- Capacitor and contactor failure on XC21 and XC25 compressors. When Haltom City pushes past 100°F in July and August, these units cycle against undersized returns in pier-and-beam ranch homes, and the electrical components take the hit. We stock OEM Lennox capacitors and contactors on the truck, so this is usually a same-day fix.
- Heat exchanger rust and cracking in G26 and G40 furnaces. Years of short-cycling from dirty blower wheels and clogged secondary heat exchangers in humid North Texas attics take a toll on these older units. We inspect the exchanger on every furnace call and give you a straight answer on repair versus replacement.
- Refrigerant line pin-hole leaks at brazed joints. Clay soil movement shifts condenser pads over time, and the lineset flexes with every inch. The joints are where leaks start. We locate the leak, repair the joint, and recharge to Lennox spec.
- Variable-speed blower motor failure on Signature units. Excessive static pressure from original duct systems that were never resized for high-efficiency airflow destroys these motors prematurely. We measure static pressure before swapping the motor, because replacing the blower without fixing the airflow just burns out another one.
- Melted disconnect boxes and burned contactors on older circuits. In the older streets off Denton Highway, many Lennox condensers still run on 30-amp circuits with original cloth-wrapped wiring. High-amp draws in 100°F heat cook the contactor and can melt the disconnect, and the Lennox unit gets blamed for an electrical problem it didn’t create.
Lennox Service in Haltom City: What Local Conditions Mean for Your Equipment
The older streets off Denton Highway in Haltom City have a specific problem you won’t find in newer subdivisions: original cloth-wrapped wiring and 30-amp circuits feeding Lennox condensers that were installed decades ago, back when homes drew far less electrical load. During peak summer afternoons, those units pull high amps for hours at a stretch, and the weak point is almost never the Lennox compressor. It’s the contactor and the disconnect box, which burn and pit from heat and resistance. We regularly replace burned contactors and melted disconnect boxes on Haltom City jobs, and we check the circuit before condemning the equipment. If you own a Lennox system in a 1950s-to-1970s home off Denton Highway, that electrical setup is part of how your system behaves, and we plan repairs around it.
Lennox Models & Products We Service in Haltom City
We service the full Lennox residential lineup in Haltom City: G40 and G26 mid-efficiency furnaces, Elite EL296V high-efficiency furnaces, XC21 and XC25 air conditioners, and Dave Lennox Signature Collection SLP98V variable-capacity furnaces. Our parts approach is simple: we stock OEM Lennox capacitors, contactors, ignitors, and flame sensors for the fastest turnaround. We’ll recommend a quality aftermarket part only when it meets or exceeds Lennox spec and saves you money. We never push a new system when a $200 control board or inducer motor is the actual fix. See our full Lennox sales & service page for more on what we carry and how we source OEM parts.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Haltom City
Here’s what you can expect to pay for Lennox HVAC work in Haltom City, before any job starts:
| Service | Typical Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3500 – $7500 |
| Tune-Up | $80 – $200 |
The spread depends on the part and the unit. A capacitor replacement lands at the low end. A variable-speed blower motor or compressor repair lands higher. Every quote is written before we start, and the estimate is free. Call (817) 730-5369 for your number.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Lennox HVAC in Haltom City
It’s almost certainly an airflow or electrical problem, not a Lennox defect. When a compressor runs against a collapsed flex duct return or an undersized return in a pier-and-beam ranch, it draws harder and runs hotter, and the capacitor absorbs that stress. We replace the capacitor with OEM, then check static pressure and amperage draw to find the real cause. Call (817) 730-5369 and we’ll troubleshoot it properly.
No. A cracked heat exchanger in a 25-year-old G26 is a carbon monoxide risk and a repair that costs more than the furnace is worth. We’ll show you the numbers for a new furnace versus the repair, straight up, and recommend replacement. Call (817) 730-5369 for a free in-home assessment and a written quote.
Sometimes, but rarely done right. High-efficiency Lennox units move air differently than the old equipment your 1960s ductwork was sized for, and if the static pressure is too high, you’ll eat blower motors and lose efficiency. We measure first. If the ducts can handle it, we install without replacing them. If they can’t, we’ll show you exactly what needs sealing or resizing, and we’ll give you a written number for that work before touching the unit.
Our Heat Pump Installation in Haltom City runs long by design, especially when temperatures drop into sudden cold snaps and the unit is working against a poorly insulated pier-and-beam crawlspace or leaky ducts. But a unit that never cycles off may also have a refrigerant leak, a failing reversing valve, or a blower problem. We diagnose the difference quickly, and the price is in writing before we start. Call (817) 730-5369.
Our pricing is in line with the market, and unlike some big shops, we put it in writing before any work begins and guarantee the repair for a full year through the 365-Day Done Right Promise. You won’t get a switch at the door or an upsell on a system you don’t need. Call (817) 730-5369 for a free estimate and compare for yourself.
Service Areas Near Haltom City
We serve Haltom City and the surrounding communities across Tarrant County. If you’re in our Haltom City service area, we’re a short drive from Denton Highway, Beach Street, or the Fossil Creek neighborhoods. We also handle Lennox service in Fort Worth, Mansfield, Burleson, Colleyville, and White Settlement.
Book Your Lennox Service in Haltom City Today
If your Lennox system is acting up in Haltom City, call (817) 730-5369. A live person answers, 24/7. We’ll schedule a visit inside a window we honor, put the price in writing, and stand behind the repair for a full year. Tell us what it’s doing, and we’ll tell you what it needs.
Written by Marco Benitez, Owner at Dalton Heating & Air Fort Worth, serving Haltom City since 2003.